If you’re replacing a 3,500-lb trailer hub with a tapered spindle, you need a pre‑assembled, pre‑greased kit that fits your axle’s spindle and bolt pattern. The following five products are selected for reliability, compatibility with #84 spindles, and ease of installation. They’re ideal for light- to mid-duty trailers and boat trailers where a quick swap saves time and effort.
| Product | Spindle / Bolt Pattern | Pre-Greased | Best For |
|---|---|---|---|
| Dexter 3500 lb Trailer Hub Assembly Kit | 5 on 4-1/2″ (5×4.5) #84 spindles | Pre-Greased | Light-duty trailers needing EZ-Lube compatibility |
| GREPSPUD 2 Sets 5 on 5″ Trailer Hub Kit | 5 on 5″ (#84 spindle) | Yes | Spindles with 5×5″ bolt pattern, value-packed set |
| GREPSPUD 2Sets Trailer Hub Kits 5 on 4.5″ | 5 on 4.5″ (#84 spindle) | Yes | 5×4.5″ trailers needing extra seals and caps |
| Redants 2 Sets 3500 LB Trailer Hub Kit | 5 on 4.5″ (#84 tapered spindle) | Pre-lubricated | Rugged, rust-resistant kit for 3,500-lb axles |
| Youxmoto Trailer Idler Hub Kit 5 on 5 | 5 on 5″ bolt circle (L68149 / L44649 compatible) | Pre-greased | Direct replacement for tapered spindles with L68149 / L44649 |
Dexter 3500 lb Trailer Hub Assembly Kit
Dexter AXLE’s 3500-lb hub kit is designed for EZ-Lube idler axles with #84 spindles. It comes pre-greased and includes inner and outer bearings (L68149 and L44649), races, grease seal, grease cap, wheel bolts, and lug nuts. Best for light-duty trailers needing a ready-to-install component with EZ-Lube compatibility. Caution: verify spindle type and ensure EZ-Lube compatibility before purchasing to avoid mismatches.
GREPSPUD 2 Sets 5 on 5″ Hub Kit
This GREPSPUD kit includes two 5×5″ hubs with the necessary bearings and seals for 3,500-lb axles. It comes with extra dust caps and rubber plugs, offering good value and a complete set ready for replacement. Best for users replacing hubs on vehicles with 5×5″ patterns and #84 spindles. Choose this if you need spare parts included. Caution: size and compatibility must be double-checked before ordering to avoid mismatch.
GREPSPUD 2Sets 5 on 4.5 Hub Kit
This GREPSPUD kit is tailored for 5×4.5″ trailers with #84 spindles and EZ-Lube Axles. It includes two hubs, two outer bearings (L44649), two inner bearings (L68149), seals, lug nuts, and extra dust caps. Best for those needing a 4.5″ bolt pattern kit with ready-to-install parts. Limitations: not suitable for straight spindles—verify spindle type before ordering.
Redants 2 Sets 3500 LB Trailer Hub Kit
Redants provides pre-lubricated bearings and grease seals for 1-1/16″ to 1-3/8″ spindles in a 5×4.5″ configuration. The kit emphasizes rugged, rust-proof hardware and simple installation. Best for users seeking a ready-to-use kit that resists corrosion on boats or outdoor trailers. Caution: ensure correct taper spindle compatibility and bore sizing before ordering.
Youxmoto 5 on 5 Idler Hub Kit
Youxmoto’s idler hub kit is designed for 3,500-lb axles with a 5-hole, 5″ bolt circle. It includes L68149 inner and L44649 outer bearings, plus necessary seals and caps. Best for direct replacement on tapered spindles that match these bearing types. Caution: verify spindle bore and bolt pattern to avoid fit issues.
Buying Guide
What should I check before buying a 3,500-lb trailer hub kit?
- Spindle compatibility: Confirm whether your trailer uses tapered (1-1/16″ to 1-3/8″ #84) vs. straight spindles. Match the kit’s bearings (L68149/L44649) to your axle.
- Bolt pattern: Ensure the hub kit’s bolt pattern (e.g., 5×4.5″ or 5×5″) matches your wheel.
- EZ-Lube compatibility: If your trailer uses EZ-Lube axles, choose kits explicitly listing EZ-Lube compatibility.
- Included hardware: Look for kits that include bearings, races, seals, caps, lug nuts, and bolts to avoid buying parts separately.
- Pre-greased vs. pre-assembled: Pre-greased kits save installation time; pre-assembled bearings minimize on-site work.
- Environmental conditions: Rust-resistant finishes are beneficial for boat trailers or saltwater use.
FAQ
- What does 3,500 lb hub capacity mean for me?
It indicates the axle’s safe working load; ensure your entire trailer axle and frame support that rating. - Do these kits fit EZ-Lube axles?
Some kits are listed as EZ-Lube compatible; verify product notes and confirm compatibility with your axle type. - How do I know which bearing numbers I have?
Check your current bearings for part numbers L68149 (inner) and L44649 (outer) to match kit components. - Can I mix hubs from different brands?
It’s best to use identical bolt patterns and bearing sizes; mixing may cause wheel misalignment or improper fit. - Is pre-assembly important for installation speed?
Yes. Pre-assembled hubs reduce handling and installation time on the trailer. - What if the hub kit doesn’t fit my spindle?
Return or exchange with correct spindle type (tapered vs. straight) and bolt pattern verified.