Answering the common question “which mud flap mounting bracket should I buy?” this guide covers top brackets that fit standard bar-type mud flap hangers and flat-plate mounting systems. These selections are suitable for fleet managers, independent truck owners, and trailer operators who want durable, easy-to-install mounting hardware. Each product is evaluated for compatibility, installation practicality, and suitability for common bar sizes (0.640″, 0.750″) and vertical or horizontal mounting styles. The table below highlights five strong options to consider.
| Product | Best For | Key Benefit | Notes |
|---|---|---|---|
| CHDT66 Bar Type Kit | Standard 0.640″ bar hangers | Complete kit with mounting hardware | Includes two mounting brackets and all needed hardware |
| CHDT66 Cast Steel Vertical Kit | Heavy-duty vertical mounts | Sturdy cast steel construction | 2.0″ hole centers; vertical orientation |
| Automann Mud Flap Mounting Kit | 2″ mounting centers | Accepts 5/8″ square stock hangers | Solid hardware included |
| TBOZZ E-Coating Bracket Set | All-around protection and fit | Coated for corrosion resistance | Boxed kit with two brackets and hardware |
| ANAQA 2-Pack Straight Hangers | 30″ length, 1-1/8″ spacing | Spring-loaded, DOT-Tape included | Compatible with multiple semi trucks |
CHDT66 Bar Type 0.640” Mud Flap Hanger Mounting Bracket Complete Kit
This complete kit is designed for one pair of 0.640″ mud flap hangers. It includes two mounting brackets plus installation hardware (screws, nuts, and washers) with a 1.875″ center hole spacing and horizontal orientation. Best for fleets that standardize on bar-type hangers and want a ready-to-install solution without sourcing separate parts. Suitable for mid-range truck and trailer applications where quick setup matters.
Who it’s best for: operators needing a full, ready-to-install set for 0.640″ bar hangers. Why selected: it provides the necessary hardware in one package, reducing sourcing steps. Caution: double-check hole-center compatibility with your existing hangers to avoid mismatches.
CHDT66 Cast Steel Mouning Bracket Kit for 0.640″ Extra Heavy Duty Bar Type Mud Flap Hangers
These cast steel mounting brackets are built for extra heavy-duty 0.640″ square bar mud flap hangers. The kit includes one each KSC-B600L and KSC-B600R brackets plus installation hardware, with a 2.0″ hole center and a vertical orientation. Best for fleets operating in harsh environments or with high-vibration applications where extra rigidity is needed. Selected for strength and kit completeness. Caution: Not compatible with 0.750″ square bar hangers.
Automann Mud Flap Mounting Bracket Kit
Automann’s kit accepts 5/8″ square stock hangers and uses a 2″ mounting center. It comes with hardware included for straightforward installation. Best for operators who need proven compatibility with common square stock hangers and a compact mounting footprint. Choose this if your system uses 2″ centers and you want ready hardware in the box. Caution: verify your hanger size before purchase to ensure fit with the 5/8″ stock requirement.
TBOZZ E-Coating Black Mud Flap Hanger Bracket
This black mud flap hanger bracket comes with hardware in a boxed kit and includes left and right-hand pieces. The coating—E-coating plus powder finish—offers corrosion resistance. Best for operators seeking a durable, weather-resistant solution. Caution: confirm that the 0.640″ or 0.750″ bar type matches your specific hanger size, as 0.750″ variants are not universally interchangeable with all 0.640″ models.
Heavy-Duty Adjustable Mud Flap Mounting Bracket for 2-Inch Receiver Hitch
Designed for universal fit on most trucks and trailers with 2″ receiver hitches, this bracket emphasizes visibility and durability. Features include bright reflective strips for low-light safety, robust rubber construction for extreme impacts, and all-weather protection to block mud and spray. Best for operators who need an adaptable mounting solution that integrates with a hitch-based setup. Caution: check compatibility with existing mud flap hardware since this is a more generic bracket option.
Pair Angle Down Bar Mud Flap Hangers Bracket Kit
Angle-down bar mud flap hangers in a 28″ horizontal length provide an adjustable system with mounting kits and mud flap hardware. Best for semi-trailers requiring downward-facing hangers and additional protection with reflective plates. Caution: ensure bolt spacing matches your existing setup, particularly if you use spanned or non-standard bar types.
ANAQA 2 Pack Straight Mudflap Hangers Brackets
ANAQA’s 2-pack straight mudflap hangers feature a 30″ length with 1-1/8″ bolt spacing and spring-loaded ends, plus DOT-C2 conspicuity tapes. Best for semi-trucks that need longer, straight hangers with enhanced visibility. Caution: measure exact bolt spacing before purchasing to ensure compatibility with your mounting studs and flaps.
Buying Guide
Key considerations when choosing mud flap mounting brackets:
- Hanger size compatibility: confirm whether your system uses 0.640″ or 0.750″ square bar hangers, or a different bar type.
- Mounting center and hole spacing: ensure your mounting holes align with your vehicle’s existing frame or mud flap hardware.
- Orientation: horizontal vs vertical mounting affects clearance, flap swing, and debris clearance; choose based on your vehicle type and mounting space.
- Material and coating: cast steel and heavy-duty metals offer strength, while coatings (E-Coating, powder) improve corrosion resistance in harsh environments.
- Hardware included: kits with nuts, bolts, washers, and mounting blocks save time and reduce sourcing steps.
- Compatibility with existing mud flaps: confirm that your flaps’ size and hole pattern align with the brackets’ mounting hardware.
- Installation ease: pre-assembled kits and clearly labeled parts simplify on-site mounting for fleets and DIY installers alike.
- Safety and visibility: reflective elements and conspicuity tapes can improve nighttime visibility and road safety.
FAQ
- Q: Do these brackets fit both horizontal and vertical mud flap hangers? A: Some kits are designed for horizontal mounting, others for vertical; check product descriptions for orientation details.
- Q: What bolt spacing should I expect on common truck brackets? A: Common spacing includes 1.875″ to 2.0″ centers for many 0.640″ and 0.750″ bar hangers; measure your existing setup.
- Q: Are hardware and mounting blocks included in all kits? A: Many kits include mounting hardware, but confirm contents before purchasing.
- Q: Can I mix brackets from different brands? A: It’s possible but not recommended unless bolt patterns and bar sizes match exactly.
- Q: Is coating important for mud flap brackets? A: Yes, coatings help resist corrosion from road salt and weather exposure.
- Q: Do these brackets require professional installation? A: Some setups are straightforward; more complex configurations may benefit from professional installation.